Payment & Shipping Terms:
|Item:||EuroGuard Welded Wire Mesh Fence||Applicable Post:||Round Post, Square Post, Peach Post|
|Panel Height:||Maximum 2.4m||Panel Length:||Maximum 3m|
V-shaped EuroGuard Welded Wire Mesh Fence PVC Coated After Galvanized
The Wire Mesh Fence is a kind of welded mesh for fencing, the panels and posts are joined together with clamps.
The surface treatment is PVC coated after galvanized, the color could be green, blue, white, etc.
It's a type of welded fence used for security and isolation of highway fencing, stadium fencing, machine protection, green belt fencing, zoo fencing, decoration, etc.
The Wire Mesh Fence is formed by welding cold-drawn low carbon steel wire which is fixed with steel tube supporting posts by joint accessories.
The wire mesh fence is custom made by our factory , each fence panel comes with a post and accessories.
The post type could be round post, square post or peach post.
1. Public building fence
2. Private place fence, Where visibility is desirable
3. Residential perimeter fence
4. In Parks, Zoos and nature reserves
|Specification of wire mesh fence|
|Mesh Size||50x100, 50x150, 50x200,55x100,55x200||mm|
2x0.63, 2x0.83, 2x1.03, 2x1.23, 2x1.43,
2.5x1.63, 2.5x1.83, 2.5x2.03, 2.5x2.23, 2.5x2.43
|m(L x H)|
|Square Post Size||
50x70, 70x100, 50x50, 60x60
|Round Post Diameter||
32, 36, 38, 40, 42, 48
|Wire diameter||3-6mm, or as customer’s request||mm|
|Surface Treatment||PVC coated & Powder spraying|
|Color||Green, blue, black, white, yellow, etc.|
|Post shape||Round, peach post, square, T-type, Y-type post|
There’re common specifications of products. Non-standard can also be customized as customer's request.
Wire Drawing → Wire Straightening & Wire Cutting → Welding → Folds / Curves Bending → Electric Galvanizing / Hot-dipped Galvanizing → Parkerizing → PVC Coating / Spraying → Packing → Loading
Straightening & Cutting
The cold rolled wire rods in the coil form is passed through pre set die and cartridge units (special sets for different diameter wire rods) present in the straightening and cutting machine, where the wire rods are first straightened and then cut to set length (precision up to 2mm) automatically.
The wires are welded by electric resistance in an automated state of the art machine which controls welding parameters precisely.
The bending machine available is used to bend the mesh panels to form the V shape design.